Cast iron
The term 'cast iron' refers to a range of iron-carbon alloys, with a carbon content that is typically between 2 and 4%. During the Industrial Revolution, before the widespread development of the steel industry, cast iron was commonly used in a wide range of architectural applications because of to its relative affordability.
Cast iron is manufactured by re-melting pig iron along with quantities of limestone, silicon and carbon (and sometimes scrap steel). Traditionally, cast iron is melted in a blast furnace known as a cupola, but it can also melted in electric induction furnaces or arc furnaces. The molten cast iron is then poured into a holding furnace or ladle ready for casting (that is, being poured into a mould, and allowed to cool).
The advantages of using cast iron derive from its relatively low melting temperature, which increases its usability, and its good compression strength. However, it is weak in tension and bending, and will fracture before it bends or distorts. It also loses strength and stiffness when subjected to high heat.
In comparison with wrought iron or steel, cast iron is non-malleable, hard and brittle.
[edit] Related articles on Designing Buildings
- Aluminium.
- Conservation of Architectural Ironwork.
- Copper.
- Difference between cast iron and wrought iron.
- Failure of cast iron beams.
- Ferrous.
- Galvanised steel.
- Investment casting.
- Iron.
- Ironwork.
- Metal.
- Metal fabrication.
- Stainless steel.
- Stove.
- Structural steelwork.
- The Iron Bridge.
- Types of metal.
- Weathering steel.
- Wrought iron.
- Zinc
Featured articles and news
Listed despite problems with its design.
Zen and the art of cycling exploration.
Design Council Homes Taskforce launched
To support government 1.5 million homes target within UK climate commitments.
The story of this knowledge quarter building.
In ecology, in hydrology, in biology and in architecture.
Creating environments that promote physical, mental, and social well-being.
UK cases of neutral current diversion
Research project looks for example contributions.
Overstocking and macro-economics cause a decline.
The 2024 update of the Common Assessment Standard
Demonstrating organisational capability’ to fulfil roles under the Building Safety Act.
56 recommendations for a better built environment
Published by the CIC ahead of the King’s Speech.
SkillELECTRIC Top 8 Competitors Named
in annual search for the UK’s best student electrician.
CIOB Diversity and Inclusion technical information sheet
Step-by-step guide on implementing D and I practices.
Conservation and the Indian City. Book review.
Reversibility in conservation ethics
Learning from painting conservation.
Where It's AT Podcast launched!
New CIAT Architectural Technology Podcast goes live.